FM Series Pumps
These pumps are very robustly designed for heavy-duty applications. These pumps are equipped with a CI bearing frame with a large bearing to transmit a heavy workload and easily provide a long service life.
These pumps have heavy-duty gear joints, which are a key part of their robust design and long service life, especially in demanding industrial applications. These joints are crucial in transmitting torque from the drive to the rotor and are designed to withstand High Torque Loads, Abrasive & Corrosive Fluids, and Continuous use in Harsh Environments.
The joints are sealed to retain lubricant and prevent dry operation, These seals are designed to keep dirt, water, and other foreign materials out, significantly reducing the wear and joint failure. These gear designs allow for shorter pump lengths and easier integration in constrained spaces.
Specification
- Flow Rate: 54 to 788 GPM (12 M3/HR TO 180 M3/ HR)
- Pressure: 85 - 350 PSI ( 6 TO 24 BAR)
- MOC: Tool Steel, Hardened with Chrome platings,/ Stainless Steel Chrome plated etc
- Shaft Sealing: Gland Packing or Mechanical Seal
Material of Construction
- Bearing Housing: CI IS 210 FG 260
- Pump Housing: AIDI 304, AISI 316 Wide Hopper Fabricated
- Rotor: AISI 304 HCP, AISI 316 Un Plated
- Other Rotating Parts: AISI 304, AISI 316 (Augur Type Coupling Rod)
- Bonded Stator: Food Grade, NBR, HNBR, EPDM, Hypalon, Neoprene, Silicon, Viton
- Alkaline Slurry
- Bentonite Slurry
- Black Liquir
- Casein Slurry
- Ceramic Slurry
- Coating Mix
- Detergent Slurry
- De - Watered Sludge
- Electro Plating
- Coating Mix
- Detergent Slurry
- De-Watered Sludge
- Electro Plating Solution Slurry
- Emulsion
- Ferrite Slurry
- Fuel Oil Sludge
- Glue
- Grout Mix
- Gum Sludge
- Industrial Waste
- Latex
- Lube Oil
- Magma
- Massecute
- Molasses
- Oil Sludge
- Paint
- Varnish
- Paper Stock
- Paper & Pulp
- Printing Ink
- Sewage Sludge
- Soap Stock
- Sodium Silicate
- Sulphited Sugar Juice
- Spent Wash
- Varnish
- Vegetable Oil
- Viscose
- Water To Thickened Sludge
- Petroleum Jelly
Other Products
FSP - Series Industrial Pumps
These pumps are designed for rigid construction of cast iron with alloy steel / Stainless steel rotating parts. For corrosive Chemical applications, the pumps are of complete stainless steel construction.
FSS - Series Hygine Sanitary Design Pumps
These pumps are designed for hygiene applications. All the material parts in contact with the fluids are in smooth-finished stainless steel. The stators are of NON- NON-CONTAMINATED FOOD GRADE elastomers viz NBR, EPDM, SILICON & VITON.
FSH - Series Hygine Sanitary Hopper Pumps
These pumps are constructed with STAINLESS steel housing (wide throat design) for high viscous & fiberous fluid transferring applications. The hopper type suction allows gravity flow of plastico-viscous material on to augur cum coupling rod pushes viscous substances in to pumping cavity.
FSW - Series Industrial Hopper Pump
These pumps are constructed with a MILD STEEL wide-mouth hopper, and all the rotating parts are in alloy/ tool steel. For corrosive chemical transfer, the pumps are in complete Stainless Steel construction.
FSV - Series Vertical Pumps
These are compact and sleeve design vertical pumps driven by flanged-mounted prime movers for emptying the barrels.Various options in the joints, such as double-sealed bush/ pin.
FL Frame Pumps
These pumps are identical to the L-Frame Progressive Cavity pumps and are available for a wide variety of applications. These pumps are offered with many different types of shaft sealing arrangements.
